Split AC Units

Split air conditioning unitThe Split type air-conditioner is gaining popularity in residential situations over the window type because this type of air conditioner can be mounted easily anywhere even in rooms without windows. They are more discrete and have a low installation cost although the initial outlay can be higher than window units. There may be a small increase in power consumption in split AC units compared to the window type but overall the running cost is almost same for both air-conditioners with no difference in efficiency.

A split system has a condensing unit outside. This leads to a major advantage, as the noise level is low as the noisy part, the compressor, is kept outside. The evaporation panel remains within the building. These units are very slick looking and do not intrude on the living space. Interconnecting pipes are also external keeping the room aesthetics, as you want them. There are no structural changes or disruption with split AC units.

With a split air-conditioner, the indoor unit sucks air from the room and throws it back to the room after cooling and removing moisture from it, while the outdoor unit removes the heat to the atmosphere. In order to choose the right air conditioner, a couple of calculations are needed to establish the heat load of a given room. Body temperature is 99 degrees Fahrenheit (37 Celsius) so in order for comfort the temperature of the room should be between 70 to 79 degrees F (21 to 26 Celsius) with a relative humidity range of 20 to 50%.

An air conditioner’s heating or cooling capacities are rated by watts or kilowatts. Normally a room having two occupants carries away 50 British thermal units (BTUs) of heat per hour, per square foot of the room area. One Kilowatt is equivalent to 3400 BTUs per hour. This means for a 15 feet x 15 feet room size, an air-conditioner having a capacity of 11250 BTU (15 feet x 15 feet x 50 BTU/hour) will be required. With this, 600 BTU/hr for every person and 1000 BTU/hr for each appliance need to be added.

Simply Air Conditioning London have many years of experience in assessing property and calculating the perfect air conditioning solution for you.

With a wide range of models from leading manufacturers, we can recommend a solution that suits your needs at a very affordable price.

We carry out a site visit, provide you with a firm quotation, install the system with the minimum of disturbance, and give a top class professional service.

Our work is guaranteed to your satisfaction.

We will perform all necessary calculations and estimates leaving you to enjoy the comfort of a living environment that is comfortable and healthy all year round.

So contact us today to see how Split AC Units can work for you!

Quote from one of our happy air deflector free trial recipients:

“Our open plan office houses around 100 people. Air distribution and draft was an issue for some of them prior to fitting air deflectors. Since the fitting we’ve not had a single complaint!”

How we got here

Air conditioning is known to have been applied in Ancient Rome: aqueduct water was passed through walls of houses to cool them. In medieval Persia similar techniques involving the use of cisterns and wind towers were used in the hot season to cool buildings.

Modern air conditioning emerged after advances in 19th Century chemistry, and it was Willis Haviland Carrier who invented and first used a large-scale electrical air conditioning system in 1902.

Air Conditioner Definition

An appliance, unit, system, or machine designed to stabilise the temperature and humidity of air within an area (used for both heating as well as cooling). A refrigeration cycle is the most common method of achieving this although sometimes evaporative coolers are used for comfort cooling inside buildings and vehicles.

Main Pages

Leave a Reply

Your email address will not be published. Required fields are marked *